20 TON COMPACTING PRESS

DMC-20_Crank Type

20 TON COMPACTING PRESS

The actuator placed on the upper part makes it easy to inspect the lower part and install additional equipment.
Since the die sets can be installed from the rear side, it is easier to replace it. It also allows the automation and transfer systems to be easily installed on the front of the machine.
The product is always ejected on the same place regardless of its depth. It eliminates the adjustment for each product and provides convenience for designing.
The control device for each part is activated by a motor. So, the operator can easily set the amount for each part with a digital counter on the control panel.
A long stroke hold-down device is built into the upper ram to control consistent pressing time. It also rises up along with the upper ram for longer and firmer pressing.

SPECIFICATION

DESCRIPTION	UNIT	DMC-20
1. Max. Pressing Capacity	ton	20
2. Max. Ejecting Capacity	ton	5
3. Max. Filling Depth	mm	40
4. Max. Ejecting Stroke	mm	30
5. Upper Ram Stroke	mm	90
6. Die Control Stroke	mm	10
7. Upper Punch Adjustment	mm	40
8. Die Face Adjustment Stroke	mm	±5
9. Max. Diameter of Compact	mm	50
10. Die Stopper Capacity	ton	10
11. Compacting Speed (60Hz)	SPM	27 – 80
12. Compression indicator		Option
13. Motor	KW	3.7
14. Speed Changer		Inverter
15. Clutch & Brake		Spring Return Type / Air Clutch
16. Lubrication		Centralized Oil Lubrication
17. Working Air Pressure	kg/cm2	5-7
18. Hopper Capacity (approx.)	liter	18
19. Reducer Type		Helical Gear
20. Net Weight (approx.)	kg	2,700
21. Dimension (approx.)	mm	H2,510 × W1,490 × D1,025