40 TON COMPACTING PRESS

DMC-40_Knuckle Type

40 TON COMPACTING PRESS

The upper ram in knuckle type makes the compacting easier and provides excellent moldability.
The consistent filling amount and adequate filling power can be adjusted with the lower ram filling power that runs by an air cylinder.
It performs excellent moldability based on hydraulic and pneumatic density balance control.
The stopper position can be adjusted, and it is easy to set the pressure for both simultaneous and non-simultaneous.
The product is always ejected on the same place regardless of its depth. It eliminates the adjustment per product and provides convenience for designing.
The operation can be observed with an indicator, which is directly connected to a handle shaft, allowing easy control of each section and accurate setting.

SPECIFICATION

DESCRIPTION	UNIT	DMC-40
1. Max. Pressing Capacity	ton	40
2. Max. Ejecting Capacity	ton	40
3. Max. Filling Depth	mm	120
4. Max. Ejecting Stroke	mm	120
5. Upper Ram Stroke	mm	175
6. Die Control Stroke	mm	120
7. Upper Punch Adjustment	mm	70
8. Die Face Adjustment Stroke	mm	±10
9. Max. Diameter of Compact	mm	100
10. Die Stopper Capacity	ton	15
11. Compacting Speed (60Hz)	SPM	8 – 24
12. Compression indicator		Oil Pressure Gauge
13. Motor	KW	7.5
14. Speed Changer		Inverter
15. Clutch & Brake		Spring Return Type / Air Clutch
16. Lubrication		Centralized Oil Lubrication
17. Working Air Pressure	kg/cm2	5-7
18. Hopper Capacity (approx.)	liter	60
19. Reducer Type		Cyclo Reducer
20. Net Weight (approx.)	kg	6,000
21. Dimension (approx.)	mm	H3,280 × W1,875 × D1,400