250 TON COMPACTING PRESS

DMC-250_Crank Type

250 TON COMPACTING PRESS

The actuator placed on the upper part makes it easy to inspect the lower part and install additional equipment.
It has a wide workspace, and die sets can be installed from both the front and rear. So, it is easy to install the automation and transfer system.
The product is always ejected on the same place regardless of its depth. It eliminates the adjustment for each product and provides convenience for designing.
A long stroke hold-down device is built into the upper ram, and upper punch rises up to press until the ejection to prevent cracks by springback for bigger products.
The control device can be easily set with a touch screen. The operator can also easily set and check the amount with a digital counter showing the setpoint.

SPECIFICATION

DESCRIPTION	UNIT	DMC-250
1. Max. Pressing Capacity	ton	500
2. Max. Ejecting Capacity	ton	180
3. Max. Filling Depth	mm	150
4. Max. Ejecting Stroke	mm	100
5. Upper Ram Stroke	mm	200
6. Die Control Stroke	mm	50
7. Upper Punch Adjustment	mm	150
8. Die Face Adjustment Stroke	mm	±10
9. After Pressing Stroke	mm	10
10. Die Stopper Capacity	ton	120
11. Max. Diameter of Compact	mm	Ø100
12. Compacting Speed	SPM	6 – 24
13. Upper Punch Hold down		120
14. Under & Over Fill (Air)		7.5
15. Upper Punch, Filling, Stopper After Pressing, Die Face Adjustment		Motor Control
16. Compression Indicator		Digital Pressure Gauge
17. Motor	KW	45
18. Speed Changer Type		Inverter
19. Clutch & Brake		Spring Return Type / Air Clutch
20. Lubrication System		Centralized Oil Lubrication
21. Working Air Pressure	kg/cm2	5-7
22. Weight (approx.)	ton	32
23. Rotary Cam Switch		Electric Type
24. Reducer Type		Helical Gear
25. Dimension (approx.)	mm	H6,750 × W3,350 × D2,390