350 TON SIZING PRESS

DMS-350_Crank Type

350 TON SIZING PRESS

It is a precise sizing press that enhances the hardness of the sintered parts by calibrating the inner and outer diameters and heights and by increasing the density.
It is a mold setting type press using die sets that can be replaced both from the front and rear for its best convenience.
The automation equipment and the product feeder can be easily installed on the front of the machine.
With the ejection lever movement by ejection cam, it performs excellent extrusion.
The space is wide enough for the multi-layer product calibration.
The main part is located inside of a frame, so it has a good lubricating condition and minimized noise
It comes with a deck and ladder installed for the repair on the upper part where the actuator is located, so no additional installation is needed.

SPECIFICATION

DESCRIPTION	UNIT	DMS-350
1. Max. Pressing Capacity	ton	350
2. Max. Ejecting Capacity	ton	230
3. Max. Diameter of Sizing	mm	130
4. Max. Height of Sizing	mm	80
5. Upper Ram Stroke	mm	200
6. Ejection Stroke	mm	90
7. Die Resistance Capacity	ton	175
8. Core Rod Resistance Capacity	ton	60
9. Sizing Speed	SPM	8~24
10. Work Supply	type	Turn Table
11. Lubrication System	type	Oil
12. Motor	KW	45
13. Overall Height (approx.)	mm	7,040
14. Overall width (approx.)	mm	4,060
15. Overall Depth (approx.)	mm	2,490
16. Press Weight (approx.)	ton	37